-33%
APT M190A Paving Breaker, 1-1/4x6
APT M190A Paving Breaker, 1-1/4x6

APT M190A Paving Breaker, 1-1/4×6

Original price was: $2,640.31.Current price is: $1,770.00.

The Model 190A Airgo-Line® Paving Breaker is a 90lb class tool. The ergonomically designed handle helps reduce harmful vibration to the hands and arms of the operator. The versitile tool is based on tyhe standard Model 190, the tool being easily converted to the standard handle or ergonomic handle or vice-versa. No power is lost from the standard tool but does increase efficiency and output due to the redutcion in operator fatigue.

SKU: 1280582250 Categories: , , Brand:

Description

APT M190A Breaker

The Model 190A Airgo-Line® Paving Breaker is a 90lb class tool. The ergonomically designed handle helps reduce harmful vibration to the hands and arms of the operator. The versatile tool is based on the standard Model 190, the tool being easily converted to the standard handle or ergonomic handle or vice-versa. No power is lost from the standard tool but does increase efficiency and output due to the reduction in operator fatigue.

Download Manual

Airgo-Line Head Assembly 

Model – Part # Units M190A – 18618 M190A – 18619
Chuck Size in 1 – 1/8 x 6 1 – 1/4 x 6
Bore Diameter in 2 – 5/8
Stroke in 6 – 1/8
Blows per Minute bpm 1,350
CFM @ 90 psi CFM 75 – 80
Weight lbs 90
Length in 31
Air Inlet NPT in 3/4 MALE NPT

STANDARD FEATURES

  • AIRGO-LINE® Ergonomic Back Head (interexchangeable with standard Back Head) reduces operator fatigue
  • Patented Automatic Ball Valve (U.S. pat. # 8,276,682 B2)
  • Built-in automatic oiler
  • Rubber handle grips
  • Latch-type retainer
  • Swivel hose connection
  • Noise-dampening mufflers available
  • Four-bolt backhead
  • Universal hose connector supplied

Air Pressure

The recommended air requirement for the operation of APT tools is 90 psi (6.2 bar). Lower air pressure will decrease power, too high a pressure will increase unwanted stresses in the tool. For proper CFM ratings, please refer to the specification charts shown for each tool in this catalog.

Hose Size

APT recommends the use of at least 1⁄2” inside diameter or larger hoses to assure sufficient air flow to the tool. For portable compressor hose and longer lengths, 3⁄4 “ hose is recommended. Keep the overall length of the hose to a minimum to prevent pressure loss at the tool.

Connecting Hoses

Hoses should be rated for a minimum of 250 psi (17.2 bar). Before connecting the air hose to the tool, check the tool inlet connector to be sure it is clean and free of dirt or debris. Keeping dirt and debris from entering the tool will assure long and satisfactory operation.

Additional information

Weight 90 lbs
Dimensions 31 in
Brand

Model - Series

Related Products