Jenny 1510-C Gas Fired Combination Unit

Description

Jenny 1510-C Gas Fired Combination Unit

Jenny Gas Fired Combination Units combine over 70 years of pressure washer and steam cleaner experience with state of the art engineering and manufacturing techniques. They comprise a wide range of standard features using only the finest components and are built to our exacting standards. This guarantees years of trouble free service in almost any cleaning environment. The combination units were specifically designed for Natural or LP Gas service. The combustion chamber was engineered to allow for the natural updraft burner system to function at peak efficiency. The chassis features a modular construction to allow options to be easily installed and gives quick access to all the major components. Since these are Jenny Combination Cleaners, you get the versatility of 3 cleaners in 1. As easy as flipping a switch, the machine can go from a cold pressure washer to hot pressure washer. Change the tip in the gun and flip the machine selector switch, and the machine becomes a 325ƒF steam cleaner for the superior sanitizing and degreasing ability of a true steam cleaner. These versatile, high performance, heavy duty stationary units will make any cleaning quick, efficient, and effective. Pressures range from 750 to 3000 PSI and volumes from 2.3 to 10.0 GPM in the pressure wash mode and from 70 to 300 GPH in the steam mode. The units are ideal for cleaning all types of equipment, machinery, and parts.

Simplicity

Jenny Combination Units feature simple easy to use controls. The switches to control the Motor, Burner, and Steam Clean/Pressure Wash are in plain view and are lighted to display the machine’s status. The switches will glow Red in the Off position and Green in the On position. Switching modes from Pressure Wash to Steam Clean is as easy as changing both the tip in the end of the gun and flipping the machine selector switch.

Serviceability

Convenient access to all of the major system components was designed into the machines. The large electrical junction box houses, protects and allows for access to the entire electrical system. All electrical connections are made through a simple specially designed terminal board. The pump, motor, water and solution control systems are all centrally housed underneath a large stainless steel cover. Parts and accessories are readily available

Reliability

Only the highest-grade components are used in the construction of the equipment. The industrial heavy-duty motor drives the high performance, belt driven, oil bath, triplex, ceramic plunger pump. The combustion system was specifically designed for Natural and LP gas applications. It features a specially designed natural updraft combustion chamber, heat transfer coils and gas control valves. A unique electronic ignition system is standard to all gas fired units. It lights the gas pilot when the motor is turned on and remains on as long as the motor runs. This allows for instant main burner ignition when heat is required.

Durability

The frame is a rugged, powder coated, modular chassis specifically engineered for the gas-fired machines and features a 5-year limited warranty. All components such as the stainless steel float tank, coil casing, back panel, and the front panel are bolted to the chassis.

Safety

A long list of safety features that are standard on all Jenny units include: 24 Volt Intrinsically Safe Control Voltage, Nozzle (or Trigger Gun) Control, Over Pressure Protection, High Temperature Protection, and a Ground Fault Circuit Interrupter (Single Phase Units Only).

Quality

Quality has always been the trademark of Jenny cleaning equipment since we invented steam cleaning in 1927. Designed and manufactured in our state of the art facility, we use only the finest available pumps, motors, electrical and gas components. Each piece of cleaning equipment is thoroughly tested to guarantee that it will pass our rigorous quality standards.