Jenny E-1000-C All Electric Combination Unit

Description

Jenny E-1000-C All Electric Combination Unit

Jenny All-Electric Combination Steam Cleaners/Pressure Washers were designed and manufactured to be both convenient and environmentally friendly. These machines are packed full of standard features and are the most effective way to remove dirt, grease, or grime. You can steam clean or pressure wash all types of surfaces quickly and thoroughly. And since these energy efficient Jenny models use electricity for both power and heat – there are no objectionable flames, fumes, smoke or fossil fuel emissions. This is a big benefit when working in sanitary and confined areas.

Jenny also offers a unique electrical heating system wherein water is progressively heated as it passes over resistance elements wound within steel coils. Full operating temperatures of 325† F for steam cleaning and 200†F for hot pressure washing are reached in 90 seconds. The heat is continuous, so there are no large temperature fluctuations once the desired temperature is reached.

And since these are Jenny Combination Cleaners, you get three cleaners in one. As easy as turning a switch, the machine can go from a cold pressure washer to hot pressure washer. Change the tip in the gun and turn the machine selector switch and the machine becomes a 325†F steam cleaner.

Environmentally Friendly

Jenny has a 70 year history of manufacturing aqueous based cleaning systems using safe Bio-degradable detergents to clean even the toughest dirt, grease, and grime without the use of harsh chemicals or solvents.

Simplicity

Jenny’s All Electric Cleaners are very easy to operate. All of the controls are mounted in the electrical junction box in full view of the operator. They include: Motor Switch, Heater Switch, Steam/Pressure Selector Switch and Temperature Thermostat.

Serviceability

Convenient access to all of the major system components was designed into the machines. The large electrical junction box houses, protects and allows for access to the entire electrical system. All electrical connections are made through a simple specially designed terminal board. The pump, motor, water and solution control systems are all centrally housed underneath a large stainless steel cover. Parts and accessories are readily available

Reliability

Only the highest-grade components are used in the construction of the equipment. The industrial heavy-duty motor drives the high performance, belt driven, oil bath, triplex, ceramic plunger pump. The combustion system was specifically designed for Natural and LP gas applications. It features a specially designed natural updraft combustion chamber, heat transfer coils and gas control valves. A unique electronic ignition system is standard to all gas fired units. It lights the gas pilot when the motor is turned on and remains on as long as the motor runs. This allows for instant main burner ignition when heat is required.

Durability

The frame is a rugged, powder coated, modular chassis specifically engineered for the gas-fired machines and features a 5-year limited warranty. All components such as the stainless steel float tank, coil casing, back panel, and the front panel are bolted to the chassis.

Safety

A long list of safety features that are standard on all Jenny units include: 24 Volt Intrinsically Safe Control Voltage, Nozzle (or Trigger Gun) Control, Over Pressure Protection, High Temperature Protection, and a Ground Fault Circuit Interrupter (Single Phase Units Only).

Quality

Quality has always been the trademark of Jenny cleaning equipment since we invented steam cleaning in 1927. Designed and manufactured in our state of the art facility, we use only the finest available pumps, motors, electrical and gas components. Each piece of cleaning equipment is thoroughly tested to guarantee that it will pass our rigorous quality standards.