-20%
Multiquip Portable Electric Rebar Bender
Original price was: $7,332.00.$5,865.60Current price is: $5,865.60.
- Description
- Additional information
Description
Multiquip Portable Electric Rebar Bender
Multiquip MB25A – Bench Type, 1 in. Bar Capacity, 115V Portable Rebar Bender
Powered by a 115V single-phase motor, this Portable Bench-Type Tool bends up to 1-inch rebar to 180° in seconds—perfect for workshops and on-site reinforcement work. Built by Multiquip for precision and reliability, this Rebar Bender, a construction equipment and steel-bending machine, enhances productivity and safety. Get yours today and make every bend count.
Features
- Bends rebar up to 1-inch (25 mm), up to 180 degrees in diameter in seconds
- Angle adjustment knob allows fine-tuning of the bending angle
- The standard foot switch provides the operator the ability to free up hands for safe material handling
- Driven by a 115-Volt, single-phase electric motor @ 13 amps
- A complete set of rollers and collars is included to quickly change your bending radius
- Two built-in lifting handles are provided for easy movement around the job site
| 1. Table – Holds the roller, collar, stopper and the rebar to be bended. | 7. Start Switch – Starts the bending process. |
| 2. Roller – Works in combination with the collar depending on the diameter of the rebar to bend. | 8. Emergency Stop Switch – Stops the rebar bending and moves the roller back to the starting position. |
| 3. Collar -Works in combination with the roller depending on the diameter of the rebar to bend. | 9. Angle Adjusting Knob – Used to “fine tune” the angle after trial bends of a few pieces of rebar. |
| 4. Stopper – Holds the rebar in place when bending. | 10. Angle Select Dial – Sets the angle that the rebar is going to be bent. |
| 5. Panel A – Holds the different controls for the rebar bender. | 11. Connector (for foot switch) – Connects to the foot switch to start the machine with a push of the pedal. |
| 6. Power Switch – Turns the power of the rebar bender on or off. | 12. Handle – Used to lift the rebar bender. |
| Model | MB25A |
|---|---|
| Maximum Bending Capacity in. (mm) | |
| 1(25.4) | |
| Range of Bends | |
| 0° to 180° | |
| Standard Bending Radius | |
| Rebar No. in.(mm) | Radius in.(mm) |
| No. 3 – 3/8(9.5) | 1.125(29) |
| No. 4 – 1/2(12.7) | 1.5(38) |
| No. 5 – 5/8(15.9) | 1.875(48) |
| No. 6 – 3/4(19) | 2.25(57) |
| No. 7 – 7/8(22.2) | 2.625(67) |
| No. 8 – 1(25.4) | 3(76) |
| Maximum Bending Speed | |
| Approximately 5 seconds for 180° angle | |
| Motor Specifications | |
| Electric Motor* | 115V, 60 Hz, Single Phase, AC |
| Rated Power (amps) | 13 |
| Dimensions and Weight | |
| Dimensions LxWxH in. (cm) |
21×19.5×17 (53x50x43) |
| Operating Weight lbs. (kg) | 227 (103) |
| Shipping Weight lbs. (kg) | 331 (150) |
| Standard Equipment | |
| Foot Switch | |
| Rollers (5 sizes) | |
| Collars (6 sizes) | |
| Tool Kit | |
| Waterproof Cover | |
Related Products
-
Mixers
Multiquip EM Series Towable Steel-Drum Plaster/Mortar Mixers – Essick
Price range: $4,035.20 through $9,540.00Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Concrete Vibrators
Multiquip FXA Series High Cycle Concrete Vibrators
Price range: $1,872.00 through $2,523.20Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Mixers
Multiquip MC Series Concrete Mixers – Steel and Polyethylene Drum
Price range: $3,339.20 through $6,124.00Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Concrete Vibrators
Multiquip UM Series Mikasa Hand-Held Concrete Vibrator
Price range: $648.80 through $771.20Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Mixers
Multiquip WM Plaster/Mortar Mixer – Steel and Polyethylene Drum
Price range: $3,203.20 through $9,529.60Select options This product has multiple variants. The options may be chosen on the product pageQuick View
