-33%
APT M125 Clay Digger, 7/8x3-1/4
APT M125 Clay Digger, 7/8x3-1/4

APT M125 Clay Digger, 7/8×3-1/4

Original price was: $1,867.93.Current price is: $1,252.00.

The APT Model M125 Clay Digger can be used for digging clay, shale, hard pan and frozen ground. The Model 125 is a lighter weight tool ideal for digging medium to lightly packed soil, for light demolition work as well as for tunneling around existing foundations. With its latch type retainer, lighter wight and short length, this tool is one of the best and easiest to handle Clay diggers made today.

SKU: 1280583346 Categories: , , , Brand:

Description

APT M125 Clay Digger

The APT Model M125 Clay Digger can be used for digging clay, shale, hard pan and frozen ground. The Model 125 is a lighter weight tool ideal for digging medium to lightly packed soil, for light demolition work as well as for tunneling around existing foundations. With its latch type retainer, lighter weight and short length, this tool is one of the best and easiest to handle Clay diggers made today.

Download Manual

Model – Part #: Units M125 – 5211
Chuck Size in 7/8 Hex x 3 – 1/4
Bore Diameter in 1 – 11/16
Stroke in 2 – 3/4
BPM bpm 2,120
CFM @ 90 psi CFM 38 – 42
Weight lbs 21
Length in 18 – 3/8
Air Inlet NPT in 1/2″ FEMALE NPT

STANDARD FEATURES

  • Flapper valve design allows dirt to pass through without stopping tool
  • Drop forged, Steel D-style handle
  • Replaceable chuck and piston stem bushing
  • Latch type retainer
  • Deep, case hardened forged allot steel cylinder
  • Inside trigger for better control and safety

Air Pressure

The recommended air requirement for the operation of APT tools is 90 psi (6.2 bar). Lower air pressure will decrease power, too high a pressure will increase unwanted stresses in the tool. For proper CFM ratings, please refer to the specification charts shown for each tool in this catalog.

Hose Size

APT recommends the use of at least 1⁄2” inside diameter or larger hoses to assure sufficient air flow to the tool. For portable compressor hose and longer lengths, 3⁄4 “ hose is recommended. Keep the overall length of the hose to a minimum to prevent pressure loss at the tool.

Connecting Hoses

Hoses should be rated for a minimum of 250 psi (17.2 bar). Before connecting the air hose to the tool, check the tool inlet connector to be sure it is clean and free of dirt or debris. Keeping dirt and debris from entering the tool will assure long and satisfactory operation.

Additional information

Weight 21 lbs
Dimensions 18.375 in
Brand

Model - Series

Related Products